Cable Assembly
SFF-8643 to 4 × SATA breakout cable
Connect one internal Mini-SAS HD port to four individual SATA data connections.
- One-to-four breakout1 × SFF-8643 to 4 × SATA 7-pin ends.
- Labeled branches with metal latchesP1–P4 branch labels and metal SATA latches.
- 500 ±20 mm drawing lengthCheck the dimension reference points in R1.0.
Check controller SATA support and breakout wiring. Drive power is supplied separately.
Include quantity, mating equipment and installation requirements.
Product data
The connection, at a glance.
Connection
- Connector Type
- Mini-SAS HD / SATA
- Connector A
- Mini-SAS HD SFF-8643
- Connector B
- SATA
- Connector A quantity
- 1
- Connector B quantity
- 4
Mechanical
- Drawing length dimension
- 500 ±20 mm
- Branch identification
- P1, P2, P3, P4
- SATA retention
- Metal latches
Engineering resources
Check fit and wiring.
RHT-726-3007
Open drawing PDF ↗Before you specify
Selection guide
For an SFF-8643 host port and individual SATA drives
The published wiring is consistent with a forward breakout configuration. Verify that the controller supports SATA drives on the selected port.
Confirm the direction
Four motherboard SATA ports to an SFF-8643 backplane require a different, reverse breakout configuration.
Check protocol and drive power
An SFF-8643 connector does not identify the protocol by itself. A PCIe/NVMe port needs the corresponding cable. Supply each drive with power separately.
Measure the cable route
Check the 500 ±20 mm drawing dimension against the route to each drive, including bends and latch access.
RHT-726-3007
Ready to specify your connection?
Share the equipment, dimensions and quantity you need.
Connector requirement
Request a quote
Share your connector requirements and the specifications you need.
Mini-SAS HD SFF-8643 to 4 x SATA Breakout Cable- Product family
- Cable Assembly
- Public Part No.
- RHT-726-3007
